****UPDATE 2**** 

I included another STL with the air outlet moved over and away from the poop shoot for those that are enclosing the the poop shoot.

****UPDATE**** 

****Please check last pic on where you do NOT glue magnets in as these are locator holes for bolt heads in the Centauri Carbon.****

I decided to design a filter/muffler compo for my Centauri Carbon. I've used 10x3mm magnets from Aliexpress but they actually measure 2.7mm and not 3mm, so the hole depth in the part is 2.8mm. I've included a print test for you to see if your magnets work for the hole, if not, msg me and I'll adjust the STL for your needs.

Yes it does quieten the fan noise down

Hepa Filters: https://www.amazon.com.au/dp/B0782T7L6P?ref_=mr_direct_us_au_au&showmri

10x3mm Magnets: Aliexpress.

*****I've uploaded a version for 6x2mm magnets as a request but I have NOT tested this as I still recommend 10x3mm magnets personally. I've also uploaded a 6x2mm magnet test print to check the magnet fitment before printing the muffler*****

Tags