planter
plant pot
planter pot
self watering
self watering planter
subirrigated
- PETG 0.16mm layer, 2 walls, 15% infill
2-disc
PETG
Designer - PLA 0.16mm layer, 2 walls, 15% infill
2-disc
PLA
Designer
22
4
Sub-irrigated (self-watering) planter insert compatible with my 100mm planter pot designs.
On the bottom of the insert there are two built-in break-away support panels. You should be able to snap them off easily. The squares on the bottom have a single-layer of filament. It's optional whether you remove these strands. The purpose is to provide air flow and better drainage to prevent excess water in the soil. The filament strands should not affect functionality.
An optional floating water level indicator is included. The stick is a tight fit and you'll likely need to sand the sides on both ends to fit.
I've included a basic planter pot on the 4th plate.
Updates
- 14 April 2025
- New float indicator for original v1 pots that should float more reliably
- New v2 design with float indicator that floats up higher
Other Self-Watering Insert Types
Compatible Planters
See also: All self-watering compatible planter varieties.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(2)
- 100mm_planter_insert_base_petg_v2_Elegoo.3mfDesigner
1.70 MB
2025-08-09
- 100mm_planter_insert_base_pla_v2_Elegoo.3mfDesigner
1.70 MB
2025-08-09
