This is a Fixed version of a Follow Focus originally made by wanoman99.
I Fixed the main gear to be 0.8 pitch which makes it work with all cine lenses
and focus gears. Removed logo from the lid, and changed size of on of the rods
from 5cm to 3cm.

Below there's a link to my video showing printing, assembly and working of this Follow Focus:
https://youtu.be/bh7ySz8j7NQ

All you need is CA glue, an M5 bolt with 2 washers and a nut, 180 grit sandpaper,
a drill and grease.

Important
Use only silicon based grease, since the lithum based can eat the plastic fast.