This is the second of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and five of the push buttons from my Arcade push button collection.

I included them here with this design so you don't have to go searching for them.

There are a lot of colour combinations I would like to try with the layers, like black and gold, all pastels or even a sunset one if its possible to get the different shades of filament.

Print the bolts on their heads and if the balltop gives you issues, stick it on a raft.

Added MLS_12mm.STL for two layers and MLS_24mm.STL for a single layer.

Wiring could still be to a single D9 with up and down buttons (or left and right for Track & Field) and a couple of fire buttons but they are wasted really unless you utilise two ports on a C64 or go for a RP2040 and drag & drop some files onto it ( https://github.com/OpenStickCommunity/GP2040-CE ).

Happy days!

--PATREON & PATREON SHOP.
--https://www.patreon.com/3DFreeman

Thanks for your continued support!