LACK enclosure MMU retrofit and ventilation parts
Print Profile(0)
5
1
Released 2025-06-25
Some remixed parts that came in handy when adding another table for additional headroom in my lack enclosure, as well as some parts for a DIY ventilation system based on a salvaged 90mm 12V fan from an old PC power supply.
Originality of the Model
The author declares that this work is their personally shared model
Original creator:
universaljoint
Reprint source:https://www.thingiverse.com/thing:2743556
This model is licensed under the following terms:
No Copyright.
Models(11)
90mm_ventilation_fan_flange_v1.stl
850.57 KB
2025-06-25
- lack_extension_panel_holder_-_integral_support.stl
959.73 KB
2025-06-25
- lack_foot.stl
1.65 MB
2025-06-25
- lack_table_anchor_-_no_bump.stl
5.08 MB
2025-06-25
- magnet_washer_for_plexi.stl
190.32 KB
2025-06-25
- lack_top_cap.stl
886.48 KB
2025-06-25
- plexi_bottom_hangers.stl
197.27 KB
2025-06-25
- panel__rear_support.stl
21.67 KB
2025-06-25
- screened_ventilation_flange__for_lack_enclosure.stl
791.20 KB
2025-06-25
- Tube_flange_backplate.stl
230.10 KB
2025-06-25
- ventilation_flange_with_screen_-_panel.stl
1.82 MB
2025-06-25
View all(11)
No more
