PAYPAL paypal.me/ToxaRein Very BIG thanks!)

ONLY FDM

HISTORY OF DEMOGORGON

The Demogorgon is a predatory creature found on the alternate side of the reality known as the Upside Down. Demogorgons have a hive mind and are controlled by the Mind Flayer. Under his influence, they develop bloodlust, become extremely brutal and violent, with a limited thinking ability. Demogorgons, however, are quite intelligent creatures, with their intelligence rivalling that of humans. Once one of them fell into the hands of the boy named Dustin Henderson, one of the series’ protagonists. This allowed the boy and the viewers alike to witness all the stages of the Demogorgon’s development. This diorama represents these evolutionary stages, starting with a small dog-like creature and ending with a large humanoid monster that found a way to our world from the Upside Down.

ABOUT THIS 3D FIGURINES

The model is saved in STL files, a format supported by most 3D printers.

FDM version features:

• Contains 42 parts;
• Made in 5 development stages of Demogorgon;
• Made with divided platform for any buildplate sizes;
• Made with Locks. One part of Lock (41_Ge_lock7S(X9)) you need to print 9 times, One part of Lock (42_Ge_lock10H(X2)) you need to print twice;
• All parts are divided in such way that you will print them with the smallest amount of supports.

DLP/SLA version features:

• Same as FDM but smaller, also made as 11 parts;

SLS version features:

• Same as SLA but made as 1 part for economy your material;

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.4.1. or Simplify3D softwares.

There are 42 parts for FFF/FDM version, 11 parts for DLP/SLA version and 1 part for SLS.

Scale: Adult Demogorgon height is 1900 mm. The scale of this Scene was made in proportion to him: 1/8 for FDM version and 1/16 for SLS/SLA version.

FDM version dimensions:
After being printed will stand - 355 mm tall, 397 mm wide, 313 mm deep;

SLS/DLP/​SLA version dimensions:
After being printed will stand - 178 mm tall, 199 mm wide, 157 mm deep;

• Has a few details, to keep printing costs down.