This piece was designed using the “Eggshell AI” small model, independently developed by Shenshan Xianshi. With the Year of the Horse 2026 as its theme, it wishes everyone a “Blessed Year of the Horse 2026,” “Success at the First Try,” and an endless stream of good fortune—may your luck be ever favorable and your endeavors always prosperous!

【Model Dimensions】
Model Length × Width × Height: 188 × 188 × 250 mm
Outer Diameter of Model Base Opening: 100 mm
Inner Diameter of Model Base Opening: 90 mm

Compatible Light Base: A light source base with a diameter of 100 mm

【Printing Parameters】
FDM
Applicable Printer Models:
- All FDM 3D printers (with a build platform no smaller than 200 × 200 × 250 mm)
Nozzle Diameter: 0.4 mm
Recommended Filament Types:
- Pure White PLA, PLA+, or PETG (filament diameter 1.75 mm)
Printing Temperature: PLA+ 220°C
Heated Bed Temperature: PEI 65°C
Printing Speed: 200 mm/s
Layer Height: 0.28 mm
Wall Thickness: 0.8 mm
Bottom and Top Layer Thickness: 1.2 mm
Initial Layer Thickness: 0.24 mm
Overlap Between Extrusions: 0.15 mm
Infill Density: 30%
Support Type: Automatic Tree Supports

Stereo Lithography Printers: Suitable

The above parameters are for reference only; please adjust printing settings based on your specific printer capabilities and conditions.

Original works take considerable effort to create—please give proper credit when sharing: Original work by Shenshan Xianshi.