gpu support
gpu
gpu anti-sag support
gpu brace
gpu stand
46
4
Listen up!
Graphics cards require support.
Your GPU is straining to hold up the weight of all those cores, polygons, and shadery things.
Lend it a hand with The GPU Support System!
100+ parts of glorious printed plastic, just waiting to be utilised under a fat, sagging, hot graphics processing unit. Happy days.
OK, enough of that, try to print the Tops (ending in _T30 _T48... etc) with the seem running down (or along side) the valley cut into the thread, it will help produce an easier time threading them into the base.
The B25_8x_parts.stl is all of that row. It is to get around the 100 part limit. If you require one of these parts just open it in your slicer, select the parts, right click and select “split” then delete the versions you don't want.
The bridges are there to help but are not a cure all, depending on the thickness chosen and the filament type used, they may still bend. So if you have reverse fans on the base of your case with the blades pointing up and no motor hub struts to help out, your asking for trouble.
REMEMBER: Be safe, try these parts with your machine turned off.
PATREON & PATREON SHOP. https://www.patreon.com/3DFreeman
Thanks for your continued support!
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Models(100)
B25_8x_parts.stlDesigner
2.47 MB
2026-01-27
- BRIDGE_A120_3MM.stlDesigner
107.31 KB
2026-01-27
- BRIDGE_A120_5MM.stlDesigner
107.31 KB
2026-01-27
- BRIDGE_A140_3MM.stlDesigner
137.78 KB
2026-01-27
- BRIDGE_A140_5MM.stlDesigner
137.78 KB
2026-01-27
- BRIDGE_B120_3MM.stlDesigner
116.49 KB
2026-01-27
- BRIDGE_B120_5MM.stlDesigner
116.49 KB
2026-01-27
- BRIDGE_B140_3MM.stlDesigner
138.46 KB
2026-01-27
- BRIDGE_B140_5MM.stlDesigner
138.46 KB
2026-01-27
- BRIDGE_C120_3MM.stlDesigner
10.04 KB
2026-01-27
- BRIDGE_C120_5MM.stlDesigner
10.04 KB
2026-01-27
- BRIDGE_C140_3MM.stlDesigner
10.04 KB
2026-01-27
- BRIDGE_C140_5MM.stlDesigner
10.04 KB
2026-01-27
- C1_B25.stlDesigner
324.69 KB
2026-01-27
- C1_B46.stlDesigner
324.69 KB
2026-01-27
- C1_B65.stlDesigner
324.69 KB
2026-01-27
- C1_T30.stlDesigner
504.57 KB
2026-01-27
- C1_T48.stlDesigner
876.55 KB
2026-01-27
- C1_W4.stlDesigner
133.68 KB
2026-01-27
- CASING_B25.stlDesigner
539.05 KB
2026-01-27
- CASING_B46.stlDesigner
539.05 KB
2026-01-27
- CASING_B65.stlDesigner
539.05 KB
2026-01-27
- E1_T30.stlDesigner
533.14 KB
2026-01-27
- E1_T48.stlDesigner
905.16 KB
2026-01-27
- E2_T30.stlDesigner
604.53 KB
2026-01-27
- E2_T48.stlDesigner
976.55 KB
2026-01-27
- E3_T30.stlDesigner
604.53 KB
2026-01-27
- E3_T48.stlDesigner
976.55 KB
2026-01-27
- E4_T30.stlDesigner
517.03 KB
2026-01-27
- E4_T48.stlDesigner
889.05 KB
2026-01-27
- E5_T30.stlDesigner
517.03 KB
2026-01-27
- E5_T48.stlDesigner
889.05 KB
2026-01-27
- G1_B25.stlDesigner
343.44 KB
2026-01-27
- G1_B46.stlDesigner
343.44 KB
2026-01-27
- G1_B65.stlDesigner
343.44 KB
2026-01-27
- G1_T30.stlDesigner
523.28 KB
2026-01-27
- G1_T48.stlDesigner
895.30 KB
2026-01-27
- G1_W4.stlDesigner
153.11 KB
2026-01-27
- G2_B25.stlDesigner
321.57 KB
2026-01-27
- G2_B46.stlDesigner
321.57 KB
2026-01-27
- G2_B65.stlDesigner
321.57 KB
2026-01-27
- G2_T30.stlDesigner
501.40 KB
2026-01-27
- G2_T48.stlDesigner
873.42 KB
2026-01-27
- G2_W4.stlDesigner
131.23 KB
2026-01-27
- G3_B25.stlDesigner
310.63 KB
2026-01-27
- G3_B46.stlDesigner
310.63 KB
2026-01-27
- G3_B65.stlDesigner
310.63 KB
2026-01-27
- G3_T30.stlDesigner
490.46 KB
2026-01-27
- G3_T48.stlDesigner
862.48 KB
2026-01-27
- G3_W4.stlDesigner
120.30 KB
2026-01-27
- PEZ_B25.stlDesigner
416.78 KB
2026-01-27
- PEZ_B46.stlDesigner
416.78 KB
2026-01-27
- PEZ_B65.stlDesigner
416.78 KB
2026-01-27
- PEZ_T37.stlDesigner
544.96 KB
2026-01-27
- PEZ_T54.stlDesigner
929.57 KB
2026-01-27
- PEZ_W4.stlDesigner
127.43 KB
2026-01-27
- PROJECTILE_T31.stlDesigner
585.87 KB
2026-01-27
- PROJECTILE_T40.stlDesigner
604.53 KB
2026-01-27
- PROJECTILE_T55.stlDesigner
604.53 KB
2026-01-27
- PROJECTILE_T73.stlDesigner
989.05 KB
2026-01-27
- R1_B46.stlDesigner
324.79 KB
2026-01-27
- R1_B65.stlDesigner
324.79 KB
2026-01-27
- R1_T30.stlDesigner
504.53 KB
2026-01-27
- R1_T48.stlDesigner
876.55 KB
2026-01-27
- R1_W4.stlDesigner
133.77 KB
2026-01-27
- R2_B46.stlDesigner
324.79 KB
2026-01-27
- R2_B65.stlDesigner
324.79 KB
2026-01-27
- R2_T30.stlDesigner
504.57 KB
2026-01-27
- R2_T48.stlDesigner
876.55 KB
2026-01-27
- R2_W4.stlDesigner
133.68 KB
2026-01-27
- S1_B46.stlDesigner
300.47 KB
2026-01-27
- S1_B65.stlDesigner
300.47 KB
2026-01-27
- S1_T30.stlDesigner
480.36 KB
2026-01-27
- S1_T48.stlDesigner
852.33 KB
2026-01-27
- S1_W4.stlDesigner
109.65 KB
2026-01-27
- S2_B46.stlDesigner
319.81 KB
2026-01-27
- S2_B65.stlDesigner
319.81 KB
2026-01-27
- S2_T30.stlDesigner
486.61 KB
2026-01-27
- S2_T48.stlDesigner
858.58 KB
2026-01-27
- S2_W4.stlDesigner
128.79 KB
2026-01-27
- S3_B46.stlDesigner
319.61 KB
2026-01-27
- S3_B65.stlDesigner
319.61 KB
2026-01-27
- S3_T30.stlDesigner
492.86 KB
2026-01-27
- S3_T48.stlDesigner
864.83 KB
2026-01-27
- S3_W4.stlDesigner
128.60 KB
2026-01-27
- T1_B46.stlDesigner
300.28 KB
2026-01-27
- T1_B65.stlDesigner
300.28 KB
2026-01-27
- T1_T30.stlDesigner
480.16 KB
2026-01-27
- T1_T48.stlDesigner
852.13 KB
2026-01-27
- T1_W4.stlDesigner
109.26 KB
2026-01-27
- T2_B46.stlDesigner
322.64 KB
2026-01-27
- T2_B65.stlDesigner
322.64 KB
2026-01-27
- T2_T30.stlDesigner
502.33 KB
2026-01-27
- T2_T48.stlDesigner
874.30 KB
2026-01-27
- T2_W4.stlDesigner
131.63 KB
2026-01-27
- T3_B46.stlDesigner
318.15 KB
2026-01-27
- T3_B65.stlDesigner
318.15 KB
2026-01-27
- T3_T30.stlDesigner
489.54 KB
2026-01-27
- T3_T48.stlDesigner
871.47 KB
2026-01-27
- T3_W4.stlDesigner
130.84 KB
2026-01-27
View all(100)
