pacman
pacman ghost
pixel art
ghost
filament change
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
1
0
Pacman Ghost (pt2), with 2 filament changes
Inspired by “Pixel Art”.
With 2 filament changes for a total of 3 different colors
This print must to be slice with "Initial Layer Height" and "Layer Height" = 0.20 mm (unless there is a change in scale)
Except change of scale and/or layer height befor slicing.
You need to add 2 "filament change" (g-code "M600") or "pause" (g-code "M0") depending on your printer/firmware to change filament, before each of the last 2 layers.
Start with : White filament until Z0.40
Switch to : Red filament until Z0.60
Switch to : Black filament until Z0.80, the end of the print.
Credits :
- "Pixel Art Image" extracted from image found on "https://kandipatterns.com/patterns/characters/8bit-pacman-ghosts-pt2-9185"
Happy printing.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(2)
8bit-pacman-ghosts-pt2-9185.stlDesigner
13.75 KB
2026-07-23
- ES1516_ECC2_SilkPLA_0.20mm_8bit-pacman-ghosts-pt2-9185.3mfDesigner
36.26 KB
2026-07-23
