I was unable to load a profile for this as the slicing time was too long for the Bambu cloud environment. Please download the 3MF / STL instead and open it up in your slicer manually. Please note that at the original size, this file will take a VERY LONG time to slice! But it will slice eventually!

This is a HueForge print made to look like a laser-cut / wood burn print. Make no mistake, however, this is still very much an FDM print using only PLA filament. No lasers required. 

This is sized for the H series printers, however, feel free to download the file and resize ONLY the X and Y dimensions if you want to print these on the A or P printers. The 3MF already has the layer swaps coded in, and a height range modifier up to 1mm to reduce the print time. 

If you wish to use your own settings and not the 3MF, please follow the instructions below: 

Print Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 325.87x320mm in size
You may print at higher layer heights below the Base Thickness of 0.44mm
The Max allowed Thickness is 2.04mm and the Actual Thickness is 2.04mm

Filaments Used:
- #000000 PLA Kingroon Black  Transmission Distance: 0.2
- #5a4138 PLA Chrominal Chestnut Brown  Transmission Distance: 3.5
- #977133 PLA+ Sunlu Coffee  Transmission Distance: 3.3
- #ffffc7 PLA TECOR Beige  Transmission Distance: 6.3
This print uses 4 unique filaments

Swap Instructions:
- Start with Black
- At 1.08mm swap to Chestnut Brown
- At 1.48mm swap to Coffee
- At 1.8mm swap to Beige for the rest.
 

If you like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.