Nexprint Logo
Beta
3D Models Events1 Million Creator Fund
Upload

  • cc2

  • spool holder

  • spool dry box

  • Centauri Carbon 2

CC2 Fully Compatible Spool Box
Print Profile(4)
  • 0.2mm layer, 2 walls, 15% infill

    1-disc

    PETG

    Designer
  • Other parts - 0.2mm layer, 2 walls, 15% infill

    1-disc

    PETG

    Designer
  • main body - 0.3mm layer, 2 walls, 15% infill

    1-disc

    PETG

    Designer
  • inner parts monochrome - 0.2mm layer, 2 walls, 15% infill

    1-disc

    PETG

    Designer

1

2

74

4

Released 2026-03-17
Details
Files(4)
Makes & Comments (0)

This is a fully working, fully CC2 compatible, version of this sealed box. Several fixes have been applied from the nexprint version of (0.o) : 
- Enlarged bays for letting the spool mount getting in and out (still tight fit, best I could do …) 
- Cap hinges fixed
- Include all the parts
- Acrylic glass pannel channel from 1.5 to 2mm (more convenient fro me to buy)

- Knob axle fixture redesigned for less friction (still improvable) 
- I also adapted the spool gear for Elegoo spools

I choosed PETG for better clipsability and longevity, for the main body I choosed PETG-CF to reduce at maximum the warping. The big gear was prototyped in PLA and seems to work fin like this but you could easily switch to PETG. 

The big spool gear can be sandwitched between the spool mount and the spool, with the flat face against the spool. There is a nipple to be clipsed on the gear, allowing it to catch one of the three holes of your elegoo spools. 
 

Bill of materials

  • Name
    Quantity
    Notes
  • 1
    608zz ball bearing
    4
  • 2
    Self-tapping screws, 2.6 mm diameter, 10 mm long
    6
  • 3
    37 mm diameter mechanical hygrometer
    1
  • 4
    3×3mm silicone sealing strip, 1m
    1
    maybe 4x4mm would provide higher sealing
  • 5
    Thick, 6.5 mm diameter, non-slip feet
    4
  • 6
    Plaque acrylique 50×100×2mm
    2
  • 7
    35mm cable pass-through (30mm inside)
    1

Originality of the Model

The author declares that this work is their personally remixed model

Original creator:
(0.o)
Adaptation source:https://www.nexprint.com/models/C1666691

This model is licensed under the following terms:

Credit must be given to the creator

Only noncommercial uses of the work are permitted

Remixes must be shared under the same license

Models(4)

  • model file image
    inside parts.3mfDesigner

    1.45 MB

    2026-03-16

  • model file image
    customBoddy.3mfDesigner

    795.17 KB

    2026-03-16

  • model file image
    CC2BOX.3mfDesigner

    890.02 KB

    2026-03-16

  • model file image
    caps.3mfDesigner

    474.50 KB

    2026-03-16

  • View all(4)

No more