Triumph Logo Stencil – High Precision for Airbrush, Sponge & Brush

Elevate your garage, gear, or custom projects with this iconic Triumph triangle logo stencil. Designed specifically for fans of British motorcycling, this stencil is thin enough to offer flexibility while remaining durable for repeated use.

Why this design?

At a thickness of only 0.6 mm, this stencil is perfect for achieving a professional look. It is flexible enough to conform to slightly curved surfaces (like toolboxes or fuel tanks) while being rigid enough to prevent "bleeding" when used with a sponge or brush.

Technical Specifications:

• Dimensions: 175 x 175 mm
• Height: 0.6 mm (Ideally 3 layers at a 0.2 mm layer height)
• Best Materials: * PETG: Recommended for its flexibility and resistance to paint thinners/solvents.
  • PLA: Great for flat surfaces and ease of printing.

Print Settings:

• Layer Height: 0.2 mm
• First Layer: Ensure your bed is well-leveled to get crisp edges on the lettering.
• Supports: None needed.

Pro Tips for a Clean Finish:

1. Preparation: Clean and degrease the surface you are painting.
2. Fixing: Use a light coat of repositionable stencil spray adhesive or high-quality masking tape to hold it in place.
3. Application: * Airbrush: Spray perpendicularly to the stencil to avoid paint blowing under the edges.
   • Sponge/Tup: Use a "dabbing" motion with very little paint on the sponge.
4. Cleaning: If using solvent-based paints, clean the stencil immediately after use to keep the edges sharp for the next project.