Unleash your inner ninja with a stunning shuriken, Perfect for adding a touch of oriental flair to your home decor or as a show-stopping accessory for your cosplay ensemble. The possibilities are endless, so let your imagination run wild!

Print at 0.1mm for best results.
Supports are needed as it is a detailed model with sharp edges and corners.

The One In the picture is scaled by 175% (122 mm/118 mm/2.5 mm)
Original Size = 69 mm/67 mm/1.4 mm

Print Settings:

• Nozzle Temp - 220 (Silk+ PLA)
• Bed Temp - 60 (Silk+ PLA)
• Layer Height - 0.16/0.2mm
• walls/shells/perimeter - 2-3
• Infill - 10%
• Adhesion - Skirt/None

Using glue is a safe option if your printer bed has problems with adhesion