Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Aetherforge Dwarven Warship – Steampunk Fantasy Vessel

Forged in the molten depths of the Ironhollow Mountains and powered by the ancient fusion of arcane crystals and steam-driven machinery, the Aetherforge Dwarven Warship is a marvel of dwarven ingenuity. Its hull is adorned with intricate runic engravings that hum with residual magic, while pipes and turbines exhale bursts of enchanted vapor.

Legends speak of these vessels soaring through the skies of the Aether Realms, defending dwarven strongholds from sky pirates and draconic invaders alike. Propelled by aetheric thrusters and guided by crystal matrices, this warship embodies the perfect harmony of magic and machinery — a true testament to the craftsmanship of the steamsmiths.

This 3D printable model (FDM) comes in 2 parts, ready to be assembled with a touch of glue and a spark of imagination. Ideal for tabletop RPGs, dioramas, or as a collector’s display piece for lovers of steampunk fantasy.

⚔️ Stats (for D&D-style play):

• Armor Class (AC): 18 (Reinforced Aethersteel Hull)
• Hit Points (HP): 220
• Speed: 50 ft (hover), 80 ft (fly)
• Crew: 4 (1 pilot, 2 gunners, 1 engineer)
• Weaponry: Twin Aether Cannons (2d10 radiant + 2d6 fire damage)
• Special Trait: Arcane Engine Overload — once per long rest, the ship can double its movement speed and weapon damage for 1 minute, after which it must recharge for 1d4 turns.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support