The minimalist SORA vase has a soft, rounded shape with fine ribs. The organic form comes into its own on a sideboard or coffee table. The narrow opening is perfect for a few eucalyptus branches or a single flower stem, but this vase is also a refined accent without filling. The stable base and balanced shape bring calm to your space.

Dimensions: 12.8 x 20 cm
Print time: 8-11 hours
Resizable: yes, in your slicer
3D Model Type: shelled body
Printing technique: FDM / FFF / SLA
File type: STL
Recommended materials: PLA, PETG, ABS, ASA
Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings

Nozzle diameter: 0.4mm, 0.6mm, or larger
Bottom and top layers: 4
Infill: 5%
Perimeters: 2
Perimeter speed range: 25 - 45 mm/s
Layer height range: 0.25 mm - 0.4 mm
Extrusion width / wall thickness range: default
Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1 - 0.15mm) and slower print speed (25 - 30mm/s) for improved layer adhesion.

License info: PERSONAL USE ONLY.

3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon.

Thank you for respecting the time and effort that goes into each creation.