🔥 Inferna Lumen – 3D Printed Bookmark

A striking bookmark capturing the essence of fire and magic. Inferna Lumen depicts a mysterious figure conjuring flames, entwined with golden and blue flowing energy. The vivid contrasts of orange, yellow, and cyan against deep blacks give it a glowing, enchanted effect—perfect for readers who love fantasy, mysticism, and magical art.

🖨️ Print Details

• Print Settings: 100% infill, 0.08mm layer height, 0.16mm base layer
• Model Size: 42 × 145 mm
• Base Thickness: 0.48mm max (higher layer heights allowed below this)
• Max Thickness: 2.16 mm
• Actual Thickness: 2.09278 mm

🎨 Filaments Used

• PLA Bambu Black – TD 0.3
• PLA Bambu Basic Blue Gray – TD 2.5
• PLA Bambu Basic Cyan – TD 1.5
• PLA Bambu Basic Orange – TD 5.1
• PLA Bambu Basic Sunflower Yellow – TD 4.1
• PLA Bambu Matte Beige – TD 3.5

(Uses 6 unique filaments)

🧵 Manual Color Change Instructions – No AMS Needed

The file includes pre-set pause points for manual swaps.

Swap Guide:

1. Start with Black
2. At layer #10 (0.88mm) swap to Blue Gray
3. At layer #13 (1.12mm) swap to Cyan
4. At layer #14 (1.2mm) swap to Orange
5. At layer #19 (1.6mm) swap to Sunflower Yellow
6. At layer #22 (1.84mm) swap to Beige for the rest

✅ The printer will stop automatically at each pause. Purge before continuing for clean swaps.