🐧 Tux & Tex – Penguin Waves 3D Bookmark

A chilly, playful design featuring penguins dancing through waves of icy blue. Tux & Tex brings winter’s spirit to your reading adventures, combining elegance with a touch of whimsy. Perfect for nature lovers, arctic dreamers, and anyone who finds comfort in snowbound stories.

📐 Model Details

• Size: 42 × 145 mm
• Infill: 100%
• Layer Height: 0.08 mm (base 0.16 mm)
• Base Thickness: 0.48 mm
• Max Thickness: 2.24 mm
• Actual Thickness: 2.16 mm

🎨 Filaments Used (6 colors)

• Black – PLA Sunlu Black (TD: 0.3)
• Dark Gray – PLA Bambu Dark Gray (TD: 0.1)
• Cyan – PLA Bambu Basic Cyan (TD: 1.5)
• Ice Blue – PLA Bambu Matte Ice Blue (TD: 1.7)
• White – PLA Bambu Jade White (TD: 5.7)
• Red (beak) – PLA Bambu Basic Red (TD: 3)

⏸️ Swap Instructions (Manual or AMS)

1. Start with Black
2. At layer #7 (0.64 mm) → swap to Dark Gray
3. At layer #10 (0.88 mm) → swap to Cyan
4. At layer #13 (1.12 mm) → swap to Ice Blue
5. At layer #16 (1.36 mm) → swap to Jade White
6. At layer #24 (2 mm) → swap to Red
7. At layer #26 (2.16 mm) → swap back to Jade White (rest of print)

✔️ Works well both in AMS and with pre-set pause points on single-extruder printers.

🧾 Notes

• Designed for smooth swaps at fine 0.08 mm layer height.
• No supports required.
• Balanced use of bright highlights and subtle shadows for maximum contrast.