A holder ring, to fit a LSC Smart IP Indoor Camera. Nice way to monitor your print from anywhere. It can be printed without supports! I printed it in PETG, but PLA will do.

Camera macro focus mod (!)

You can make this camera into a macro lens really easy. This makes the camera focus better on the printing, instead of the back of the printer. 

1. Pop out the front of the camera. I used a small hobby knife. It's connected with a cable, so be careful.
2. Unscrew the lens a tiny bit. It's held with glue, but you can do this with your hands.
3. Connect the camera and check your focus. If you are pleased with the result, pop the front back in place.

You now have a macro camera, that can focus closer to the camera lens! ;-)

NOTE: the magnetic door will no longer magneticly close. If you want the door to magnetic snap close, you could put a smal magnet in the doorframe. It's not necessary.