The image shows a 3D-printed Dungeons & Dungeons & Dragons Spectre figure standing on a black, circular base. The spectral figure is draped in flowing robes that shift in a gradient from a deep purple at the edges to a bright, light blue in the center, capturing the essence of an ethereal being.

3D Printed D&D Spectre Figure

Technical Specifications

• Model Name: Spectre (Ethereal Form)
• Scale: 28mm (Standard Tabletop)
• Dimensions: Approximately 70mm tall x 50mm wide x 50mm deep
• File Format: STL (Stereolithography)

3D Printing Details

• Printer Type: FDM (Fused Deposition Modeling)
• Material: PLA (Polylactic Acid)
• Color Transition: This effect was achieved using a single filament with a gradient color transition, specifically from purple to blue. The filament itself changes color along its length, so no post-processing painting was required to achieve the spectral effect.
• Layer Height: 0.08mm
• Infill: 10% (Cubic)
• Supports: Minimal supports were used, primarily for the outstretched hands and the connection point to the base. The model's design is largely self-supporting.
• Print Time: Approximately 4-6 hours (depending on printer speed and settings)
• Base: A separate, solid black PLA base was printed and the figure was attached to it after the main print was completed.