Rc Stand - SouthLab | Nexprint: Free 3D Model Downloads

Stand for rc models, or any toys :)
Available 2 car sizes from 1/5 to 1/10 and the smallest car model from 1/12 to 1/24

For greater resistance and not to break when placing the screws, configure 4 walls and 4 upper and lower linings.
Gyroid infill 8%.
Layer Height 0.20 or 0.24
Don't need support.
You can print on any of the completely flat sides.
Pla, Pla+, Pla850 or Petg.

Necessary screws: countersunk M4x20mm x12und.

The model is scalable up to a scale factor of 0.75, for this scale the screws would be M3x15. (Los archivos para escala 1/12 hasta 1/24 tambien estan incluidos).

Keep in mind that the screws thread into both pieces for added strength, if using a screwdriver use low speeds and back off to get the thread done correctly.

Print in various colors and customize the fronts, happy printing!

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Standard Digital File License

This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.

Originality of the Model

Models(13)