This model was created wholly by myself, based on the idea presented on the r/dicemaking subreddit for a pottery wheel quick change sanding conversion. The original concept and was shared for free by u/Farenkdar_Zamek found here: https://www.reddit.com/r/DiceMaking/comments/1jnwedx/update_quickchange_sander_for_mini_pottery_wheel/.

Keeping in the spirit of community sharing, I will be updating these and publishing the step-files after I have parametrized them for anyone to put in their wheel size to get this working for them
=-=-=-=-

This is designed for a Mini Pottery Wheel that has a 100mm diameter and 4mm thick spinning plate.

The parts for this I have printed in Elegoo Rapid PLA+ with standard settings (2 walls, 15% infill) on my Centauri Carbon

Per pottery wheel mount:

•  2 x Mount Half
• 2 x M3 Bolts
• 2 x M3x8mm Screws

Per sanding disk you will need:

• 1 x Housing Top
• 1 x Housing Bottom
• 4 x M3 Bolts
• 4 x M3x6mm Screws
• 1 x 100mm diameter (2mm thick) acrylic disk

=-=-=-=-