Multi-purpose Fridge Magnet - Bottle Opener in the shape of Coca-Cola bottle

It will hold your notes, open your bottles and due to small storage area can also hold short pencil or receipt for return you have to do tomorrow.

To make this fridge magnet works you need four 4x2mm magnets and one 12mm in diameter, 1mm thick washer. I made 12.5mm x 1.2mm cutout so you can use slightly bigger one or smaller and just glue it in place. Use pliers to insert it as one of the pictures shows. Magnets need to be glued as well.

How to print this model.

This model require to be printed upside down. Bed contact area is small so use brim and clean your plate before you start. Use standard 0.4mm nozzle and 0.2mm layer height. 10% gyroid infill. I used new experimental seam mode „scarf joint seam” and I set it to „Contour”. It came out pretty good! Don’t use any support, just the brim.

I added two models. One is with the Coca-Cola logo and second one is without it, allowing you to use it with or without label. Couldn’t find the one I liked so I made mine in Gimp. However, there are some to choose when you "googling" Coca-Cola bottle label. Scale them to 2.1cm in height to fit on the model. Follow my guide on Heineken Fridge Magnet Bottle Opener on how to prepare typical office paper print for label.

The model with logo let you use ACE/AMS/CFS to color every part of the magnet in the right colors and do not bother with label. You may also print it like me on printer without AMS and use filament change to get the color you want. Transparent filament is great for this!

Logo version need pauses for filament change at layers: 120 (from transparent to black), 237 (from black to red) and 338 (back from red to black).

Non logo verion at layer 120 (from transparent to black).

I hope that you’ll find this magnet usefull!

If you like it and you want to give it thumbs up, please also consider downloading it. It cost you just one additional click and it’s very important to me. Also check my other models, maybe you will find something interesting :) Thank you!

Happy printing! :)