Description

Show your team pride the moment the lights go on! This layered light-box captures the iconic Cowboys star set against a subtle wave pattern. Two rear key-holes make wall-mounting easy, and a side slot routes the USB lead for your LED strip (LEDs are on the way, but I couldn’t keep the file from you any longer).

Print profiles

• 2 HD native – scale to ≈92 % for Bambu X1C / P1P-S, Neptune 3/4, etc.; settings stay the same.
• Front panel: 0.20 mm layers (first layer 0.16 mm for a flawless face)
• Back panel: 0.24 mm layers for speed

Calibration first! Run Flow-Dynamics & Flow-Rate on every colour—the first layer is your display surface.

Assembly & lighting

1. Press-fit or CA-glue the coloured face to the charcoal backing.
2. Feed a 5 V USB LED strip through the slot and tape it around the inner lip.
3. Hang via the built-in key-holes, plug in, and let the star shine. ⭐️

Hardware & consumables I use

(Affiliate links—using them won’t change your price but helps me keep designing, thank you!)

• 5V COB LED Strip Narrow 5mm → Link
• Type-C Female Chassis Waterproof 2P→ Link
• Soldering Kit → Link
• 3 M double-sided foam tape for securing LEDs → Link
• Super Glue Clear, Strong Adhesive→ Link
• Polymaker PLA PRO → Link
• Elegoo PLA → Link
• ANYCUBIC PLA Plus → Link

🔧 Want to level up your 3D printing setup? I’ve compiled a list of essential tools, filaments, and accessories I personally use and recommend:

👉 🛠️ MS 3DPrints Essentials – Amazon Buying List (Affiliate link – helps support the project at no extra cost to you!)

💬 Feedback, remixes, and makes are always welcome. Let’s build smarter, together!