A phoenix with wings spread wide soars through the clouds, symbolizing good fortune and auspiciousness.
This model takes that very image—“the phoenix dancing among the nine heavens”—as its theme, resulting in a set of three square-cross-section pen holders available in different sizes:
Large: 79 × 79 × 120 mm
Medium: 66 × 66 × 100 mm
Small: 53 × 53 × 80 mm
Please note that manual measurements may have slight deviations; the actual dimensions shall prevail.
 

The small and medium sizes can be used as standard pen holders, while the large size is versatile—it can serve as a pen holder, a chopstick holder, or even a cutlery storage container, combining aesthetic appeal with practical functionality.

After numerous print tests, we’ve found that 60 mm/s is an optimal speed for printing silk-like filaments: printing too fast will cause the filament to lose its silky sheen, whereas printing too slowly wastes time without delivering commensurate results. If you’re printing non-silk filaments, you can download the file and adjust the print speed accordingly before printing.
 

Another important point when using the octagonal spiral infill pattern is that, due to the frequent turns, the flow rate should be reduced to 0.95–0.97; otherwise, the surface finish will be extremely uneven. This is especially true when using multi-color filaments: reducing the flow rate while printing with the octagonal spiral produces a strikingly textured bottom and top surface.

We plan to release more fun, engaging, and practical designs in the future.
We hope you’ll enjoy them—your support is the greatest motivation for me to keep creating.