A slingshot toy that locks in place by relying on the friction between the central hole of the slingshot and the square tube itself. It may not perform well with heavier configurations. We recommend using a flat rubber band with a thickness of 0.8 mm; after trimming it to an appropriate length, insert the band into the slingshot groove. The pull distance is approximately 50 cm.

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

No Copyright.

Models(17)

  • model file image
    华子弹弓1.1,微调部分零件的尺寸.3mfDesigner

    130.86 KB

    2026-05-28

  • model file image
    扳机垫片.stlDesigner

    4.77 KB

    2026-05-28

  • model file image
    扳机垫片限位片.stlDesigner

    0.67 KB

    2026-05-28

  • model file image
    扳机杠杆.stlDesigner

    9.26 KB

    2026-05-28

  • model file image
    扳机转轴(1).stlDesigner

    4.38 KB

    2026-05-28

  • model file image
    扳机转轴(2).stlDesigner

    4.38 KB

    2026-05-28

  • model file image
    扳机转轴.stlDesigner

    4.38 KB

    2026-05-28

  • model file image
    导轨前段.stlDesigner

    45.30 KB

    2026-05-28

  • model file image
    导轨蓄能卡槽扳机槽.stlDesigner

    55.65 KB

    2026-05-28

  • model file image
    导轨中段1.stlDesigner

    79.96 KB

    2026-05-28

  • model file image
    导轨中段2.stlDesigner

    121.76 KB

    2026-05-28

  • model file image
    皮筋头.stlDesigner

    7.89 KB

    2026-05-28

  • model file image
    前握把.stlDesigner

    3.01 KB

    2026-05-28

  • model file image
    枪托1.stlDesigner

    9.07 KB

    2026-05-28

  • model file image
    枪托2.stlDesigner

    36.41 KB

    2026-05-28

  • model file image
    枪托3.stlDesigner

    30.45 KB

    2026-05-28

  • model file image
    枪托接口.stlDesigner

    4.38 KB

    2026-05-28

  • View all(17)

No more