Printing Parameter Recommendations 

Infill Settings 

Infill Density: For the main structure, we recommend 15%–25% (balancing strength with material savings). Infill Pattern: We suggest using a triangular pattern, as it is the easiest to print, involves the simplest motion, and is less prone to stringing.

It strikes a good balance among print speed, stability, and structural integrity.

Wall Thickness (Shell): At least 2 layers (1.2 mm or more) to prevent cracking at flaky or sharp protruding areas.

Print Speed 

You can simply use the default settings from Tiertime.

Support Settings: 

It’s best not to enable supports on your own outside of the default settings, especially for voxelized models, which often have numerous overhangs built in.

Similarly, for voxel-style models: because they often feature many unsupported walls, their printing relies heavily on the printer’s cooling performance. For the A1 series, we recommend reducing the print speed to prevent overhang collapse; for P, X, H2D, and other models, be sure to set the auxiliary cooling fans to maximum power.