Printing Instructions:

• The model features numerous sharp corners around its perimeter and is oriented with the bottom facing down. To ensure print quality and minimize support material usage, a inverted printing approach was adopted, and the model includes a small number of detachable parts.
• Inverted printing can result in an uneven weight distribution—heavier on top and lighter on bottom—which may cause the print to detach from the build platform. To address this, a anchoring and reinforcement structure (similar to scaffolding) was added to secure the entire assembly. After printing, simply cut the anchor points with wire cutters; any remaining small anchor remnants can be trimmed with a craft knife. Most anchor points are located on the monster’s back, so once removed, there will be virtually no visible traces.
• If certain detachable parts become loose or fail to stay securely in place after assembly, you can reinforce them by applying adhesive.
• The finished model stands approximately 11.5 cm tall and is compatible with BRIO Star Series S and the Wonderful Infinity Series. If you plan to pair it with SHF or other toys, consider scaling up the print to 150% to maintain proper proportions.
• The model is a single-color prototype and requires manual painting; given the simple design of this monster, coloring should be relatively straightforward.