Space Explorer
0.2 mm layer height, 2‑wall walls, 15% infill density
6-disc
PETG
Designer
0.2 mm layer height, 2‑wall walls, 15% infill density6-disc
PETG/PLA
Designer
37
4
3D Printing Astroneer Work Light _ Bilibili _ bilibili
The prototype serves as a base for small to medium-sized objects in the game Astroneer, featuring internal LED illumination. The file names begin with a color code, and a “x followed by a number” at the end indicates the required print quantity. When powered via a Type-C cable, the device can draw power from the DC port located on the top, supplying power to the upper component. Both ends are equipped with Type-C connectors, allowing for daisy-chaining using a dual‑Type‑C cable.
Bill of materials
- NameQuantityNotes
- 1dc母头1
- 2typec接头2
- 32835贴片led柠檬黄8
- 4680欧电阻2
- 5电线1
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Models(16)
grey脚插销x8.stlDesigner
451.33 KB
2026-03-05
grey脚环x2.stlDesigner1.05 MB
2026-03-05
grey小型平台平面v2.stlDesigner371.89 KB
2026-03-05
red插槽环.stlDesigner2.59 MB
2026-03-05
red插口内红环x2.stlDesigner1.42 MB
2026-03-05
red插口外红环x2.stlDesigner3.71 MB
2026-03-05
transparent or yellow插口灯环v3 x2.stlDesigner1.13 MB
2026-03-05
white脚垂直链接x2.stlDesigner2.11 MB
2026-03-05
white脚水平链接x2.stlDesigner894.54 KB
2026-03-05
white小型平台主体 v2.stlDesigner2.84 MB
2026-03-05
yellow黄色把手x2.stlDesigner6.42 MB
2026-03-05
black插口黑x2.stlDesigner627.97 KB
2026-03-05
grey插口封盖v2 x2.stlDesigner1.83 MB
2026-03-05
grey脚x2.stlDesigner472.07 KB
2026-03-05
- 小型平台.3mfDesigner
2.24 MB
2026-02-16
- 小型平台A1.3mfDesigner
2.17 MB
2026-03-13
View all(16)
