Wishing Everyone Abundant Wealth in 2026!

This model is easy to assemble—just be sure to thoroughly clean the print bed before printing to prevent warping along fine, delicate edges. Using a brim not only ensures a more stable print but also significantly reduces the risk of part breakage during removal. However, we don’t recommend using adhesive spray.

For assembly, simply insert the components in sequence, following the designated order.

Due to differences in material properties, some inserts may feel tight during assembly because of Z‑axis layering buildup. Apply moderate pressure or lightly sand the affected areas as needed. Additionally, certain parts may require adhesive bonding from the rear to account for shrinkage and ensure secure attachment.

The assembly includes three connecting rods: two long ones at the bottom and one shorter rod in the middle. You don’t need to fully tighten the rods all the way down to the base—after installing both side rods, adjust the tilt angle to your desired position, then firmly press them into place. Once completed, the structure will form a slight, gentle incline.

Wishing You All Good Fortune in the Year of the Horse!