Military Models
Soviet tank
Type 1931
Light tank
Dual nozzles
T-26
World War II equipment

88
10
T-26 Model 1931 Light Tank
The T-26 Model 1931 was the Soviet Union’s first mass‑produced light tank, introduced in 1931. It was developed through modifications of the British Vickers 6‑ton tank and served as a core component of early Soviet armored forces. Featuring a distinctive twin‑turret configuration, each turret mounted a single 7.62 mm DT machine gun, with a total ammunition load of 6,489 rounds. The turrets could rotate independently, providing broad coverage and emphasizing multi‑directional infantry support firepower. The vehicle employed a riveted armor hull with thicknesses ranging from 6 to 15 mm, offering protection only against small arms fire and shell fragments. Powered by a 90‑hp air‑cooled gasoline engine, it achieved a top road speed of approximately 32 km/h and utilized leaf‑spring suspension—simple in design but limited in off‑road performance. This tank saw extensive service during the Spanish Civil War, the Winter War, and the early stages of the Great Patriotic War. As a quintessential example of Soviet multi‑turret tank design, it marked an important milestone in the evolution of Soviet armored warfare—from its nascent beginnings to large‑scale development.

1/35 Scale T-26 Model 1931 3D Printed Model
Recreates the authentic vehicle’s exterior, with movable tracks and balanced suspension. Both turrets can rotate independently, and the machine guns feature elevation adjustment.

The model was entirely designed from scratch using Fusion 360—no AI‑generated content!!

Installation Steps Follow:

1. Attach the hull (apply glue in the blue area) and align it precisely using locating pins.


2. Install the four balanced suspension assemblies (ensure the printed side faces downward).

3. Mount the suspension and drive sprockets, securing them with 3D‑printed retaining clips (be careful not to lose them while handling!).

4. Install the idler wheels, ensuring the grooved side faces outward, and secure them with retaining clips as well.

5. Apply glue in the blue area, then attach the headlight housing and the upper hull components.


6. Install the two machine gun turrets, paying attention to their orientation when mounting—ensure they face backward initially, then rotate them forward once fully seated. Be mindful that the machine guns are prone to bending.

7. Attach the tracks and exhaust pipe. By default, the tracks consist of 74 links; however, depending on filament type and printer settings, their tightness may vary. Adjust accordingly.

Congratulations 🎉!! Installation complete!
💡Additional Tips
Under standard printing tolerances, the pin‑in‑hole fit is snug, making the assembly resistant to loosening during normal handling. If tolerance deviations occur due to printer precision or filament shrinkage: for slight tightness, gently sand the outer surface of the pin; for looseness, lightly tap the joint with a soft wooden mallet or reinforce it with a small amount of glue.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(1)
T-26 1931型 轻型步兵坦克-elegoo.3mfDesigner4.57 MB
2026-09-20















