Desktop Host Power Switch
- 0.2 mm layer height, 2-wall walls, 10% infill density
2-disc
PETG
Designer
10
1
You may encounter situations where the placement of certain case switches conflicts with their intended mounting locations, making it difficult to power the system on or off.
Alternatively, the original case switches might fail to function properly.
In such cases, routing the switch cables can become yet another challenging task.
To address this, I’ve designed this model—perfect for use with commercially available switch modules.
You can also customize the switch by sourcing your own actuator and wiring to build the switch from scratch.
(The split model allows you to freely reconfigure the A‑port position to determine the optimal installation orientation.)
Bill of materials
- NameQuantityNotes
- 1电脑外接桌面开关线1
- 2选装：机械轴体及键帽1
- 3选装：杜邦2.54母端2P带线1
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Models(1)
- USB开关键.3mfDesigner
139.04 KB
2026-03-13
