Consumable Materials Used:

1. PLA Basic Jade White
2. PLA Basic Black
3. PLA Basic Christmas Green
4. PLA Basic Yellow
5. PLA Basic Blue
6. PLA Basic Red

Color Change Instructions:

        Although six colors are utilized, the print can be completed using a single AMS. First, assign the first four colors—white, black, green, and yellow—to specific slots on the AMS in the print settings interface. Both blue and red are mapped to the same slot as green. Once the green layer is printed, remove the green filament and replace it with blue; similarly, after the blue layer is finished, swap it out for red. The remaining three colors do not need to be changed (the 3MF file already includes pause layers, allowing you to perform color swaps during pauses).