I’ve always wanted to create a levitating bird‑type Pokémon. This time, I chose the Longwing Seagull—let’s head to the pier for some fries~

You’ll need strong adhesive, three N52 neodymium magnets measuring φ8×3mm (to be placed inside the seagull’s body), two magnets measuring φ15×4mm (to be embedded in the leaves), and fishing line (the thinner, the less visible—I used 0.1mm diameter)

The large leaves are the three beneath the big tree.

The medium-sized leaves are the four above the big tree and the four below the small tree.

The small leaves are the four atop the small tree.

Attach one end of the fishing line to the seagull’s belly

Secure the other end to the mounting bracket beneath the platform; the long slot allows you to adjust the seagull’s height, and inserting two stoppers will lock it in place

The small tree can rotate. When attaching the leaves, we recommend placing the two outermost leaves last—they tend to clash. After settling on the tree’s position, check whether everything looks balanced.

Paint the beach chair yourself.

Wishing everyone an enjoyable printing experience!