Assembleable Chainmail Coaster Series – Six_1.0–1.2 - 金刀ZZ

This series of models are based on geometric regular hexagons and are connected by snap-in hinge structure. They can be disassembled and assembled at will, and are soft as cloth.
the first group of regular hexagonal cells in this release

You can click here to view:

regular triangle group 1

equilateral triangle group 2

regular pentagon group 1

More version combinations will be released in the future.

Since this series of models need to be assembled and combined, a certain degree of part fit is required, so it is necessary
to do a good job of flow calibration before printing!
to do a good flow calibration!
to do a good flow calibration!
otherwise, it may cause but not limited to: the 1. cannot be assembled; the 2. assembly is too loose.

Due to the small part of the connecting rod, which is almost close to the minimum limit of FDM printer, and the strength of FDM printed parts, please select consumables with certain strength and layer adhesion. After many printing tests, the minimum required consumables are PLA Basic. Most silk products have very weak strength, especially layer adhesion. The connecting rod is easily broken during disassembly and assembly and becomes disposable.

The simple schematic diagram of the assembly of each version of the current combination and the physical diagram after assembly (printed in one piece) are shown below.

1.6_1.0-A

2. VI_1.0-B

3. VI_1.0-C

4. VI_1.0-D

5. VI_1.1-A

6. VI_1.1-B

7. VI_1.1-C

8. VI_1.1-D

9. VI_1.2-A

10. VI_1.2-B

11. VI_1.2-C

12. VI_1.2-D

Due to the small parts (connecting rods),
please keep away from children under 5 years and infants to prevent accidental swallowing! Keep away from children under 5 years of age and infants to prevent accidental swallowing!
Keep away from children under 5 years of age and infants to prevent accidental swallowing!

This version group is the first platform. Please do not move and release other platforms without permission! Please do not use commercial! Only for personal research and entertainment. Thank you for your understanding and cooperation.

Finally, I wish you a happy print, print and assemble your own chain armor!

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Standard Digital File License

This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.

Originality of the Model

Models(24)