👍NB / 👎QU Stress-relief spinning ornament

A small stress-relief toy that can be magnetically attached to pegboards, computer cases, refrigerators, and other surfaces for fun stress relief. The model is two-color printed and requires AMS. By default, it comes in black and white, but you can customize the filament colors to suit your preference.

Accessory list

• 608Z bearing ×1
• Magnet ×1 (default φ10mm)

Accessory recommendations

• For the bearing, we recommend using a metal bearing for a smoother feel; alternatively, you can print the 608 bearing model on the platform as a substitute.
• For the magnet, we suggest using a strong magnet; if the suction isn’t strong enough, stack 2–3 magnets to ensure stable adhesion during rotation.

You can modify the magnet size as follows: enter the magnet’s diameter as the XY dimensions—do not leave any extra clearance—and you may leave the Z dimension unchanged (please use magnets no larger than φ10mm and no thicker than 2.4mm).

Assembly tips

All parts connected to the bearing should not be pressed all the way down; a tiny gap must be left to ensure smooth rotation.

Refer to the last assembly illustration in the model showcase for detailed instructions.