Headpiece
Headset
Heart
Heart
Arrow
- 0.2 mm layer height, 2‑wall walls, 15% infill density
4-disc
PETG/PLA
Designer
16
0
The heart’s three components are joined using a tenon-and-mortise connection, eliminating the need for glue.
The gold accents on the surface of the black heart piece were applied using an airbrush (using multiple colors would generate excessive waste, while assembling in a single color can be challenging).
A small amount of adhesive is required to secure the connection between the heart and the headband.
The headband is designed to accommodate various face shapes and sizes—when installing, be sure to align the arrows on both sides before adjusting the headband’s size.
This ensures that:
The arrow shafts pass through the head at a perfectly parallel angle!
The arrow shafts pass through the head at a perfectly parallel angle!
The arrow shafts pass through the head at a perfectly parallel angle!
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(1)
- 一箭穿心头.3mfDesigner
1.84 MB
2026-02-04
