Bamboo waste can temporarily remain on the thin sheet; once it’s nearly full, or whenever you’d like to clean it up, simply pull the cotton thread tether, and all the bamboo waste will drop down and be “flushed” away.

No need to remove the entire toilet bowl to empty it—truly fun and convenient.

The assembly steps are as follows:

1: Thread a cotton cord (thin thread) through the hole, or if you have needle and thread, remove the negative part and secure it onto the thin sheet using needle and thread.  

2: Insert the thin sheet into the toilet bowl, pressing it firmly against the bottom.

3: Thread the cord into the “water tank.” You can fold the cotton cord (thin thread) into an L-shape and then feed it through the opening—it’s very convenient! Next, assemble the water tank and the toilet base without any glue—the pieces snap together tightly!

4: Adjust the position of the cords and tie them securely to the rope fastener.

5: Tie a knot (no need for multiple knots—too thick knots may prevent insertion), then secure the cord in the designated slot.

6: Bury the cord and insert the rope fastener (the flush switch).

7: Attach the toilet lid—no glue required; it snaps on tightly!

8: Install the snap-fit mechanism (the insertion port features chamfered edges for easier installation), aligning it with the printer’s nozzle platform—print with confidence!

9: Mount it onto the printer

10: Show it off!