This is another riser for Centauri carbon.

I'm not fan of logos so there is none.

You need to print 4 pcs of long parts. There is two version, with vent and without vent.

There is also 3 types of corner pieces. L R are marked with letters L or R in bottom. Those are back corners left and right side.

There is corner U which is for both front corners.

Cover part can be attached to the riser with magnets. This model uses D6x2,5 magnets and you need 4pcs for every vented long part. There is also “o-ring” groove to make it more air tight. You can use 1,75mm TPU filament as o-ring. I'm not sure if it is needed but you can add if you want. Storing those covers are easy, just attach unused covers to side of printer.