Description: 

These clamps are designed to make it easier to replace smartphone and tablet displays. Their compact design and stable grip keep the display in place while the glue dries, ensuring a uniform and secure fit. 

Key Features: 

• Easy to assemble 

• Easy to position and remove 

• Printable without supports 

• Compatible with all smartphones and tablets 

Recommended Use: 

Position the clamps along the edges of the device after applying the new display with glue, leaving them in place until it dries. Below you will find a detailed list of the various parts and a guide with assembly instructions. You can also find a handy animation (GIF) in English at the bottom of the page

1. Mobile Clamp

   

2. Fixed Clamp

   

3. Knob

   

4. Screw

   

5. Coverage

   

Assembly Instructions:

Tighten the screw into the movable clamp COUNTERCLOCKWISE.

• 

   

• Insert the dovetail part into the side slot of the fixed clamp

  

• Slide along the slide until the screw reaches the stop

• 

• Make sure the hex has come out completely on the opposite side

• 

• Insert the knob onto the hexagon until it stops.
• CAUTION: In 3D printing, hexagonal shapes tend to shrink differently on different sides, so if the knob doesn't lock into place, try removing it and rotating it to another position until you find the correct one. Alternatively, you can place a drop of cyanoacrylate glue inside the knob before inserting it onto the screw's hexagon.

• 

• Place the cover over the movable clamp in correspondence with the slots positioned on the fixed clamp

  

• Press the cover so that it snaps into place and locks onto the fixed clamp

  

MONTAGGIO PASSO-PASSO (GIF) / STEP-BY-STEP GIF INSTRUCTIONS