Dragon Claw Book Nook – Modular Bookshelf Decoration (3 Parts)

Description:
A detailed fantasy book nook inspired by a dragon claw breaking through a cracked rock wall between books. The model is designed as a striking decorative insert for a bookshelf — perfect between hardcovers where it creates a dramatic “break-through” visual effect. The surface is optimized for FDM printing and looks especially good in black or galaxy PLA, which enhances the scale texture, claws, and fractured background.

The model is split into 3 separate parts for easier printing and effective lighting:

1️⃣ Front claw section — printed flat on the build plate for best detail quality and claw strength.
2️⃣ Center box/frame — forms the main body of the book nook and includes a slot for inserting the back panel.
3️⃣ Rear insert panel — ideally printed in red filament to create a glowing background effect.

It is recommended to place an LED tea light candle inside — preferably red — to highlight the cracks and create dramatic backlighting without heat.

The geometry is prepared for clean printing without complex adjustments. Layer lines naturally support the organic look, and the model works both as a standalone decoration and as a themed addition to a fantasy bookshelf.

Recommended Print Settings:

Material: PLA / Galaxy PLA / Matte PLA
Layer height: 0.16–0.2 mm
Infill: 10–15% (gyroid / cubic)
Walls: minimum 3 perimeters
Nozzle: 0.4 mm
Supports: usually from build plate only (depending on part orientation)
Colors: black (front + frame), red (rear panel)