Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Fortified Stone Golem is a heavily armored fantasy golem designed for D&D, RPGs, tabletop games, fantasy dioramas, and miniature collections.

This imposing stone construct combines the raw power of a golem with the defensive design of a fortified warrior. Its massive armored body, oversized gauntlets, heavy plating, chains, and castle tower integrated into its back give it the appearance of a walking fortress ready to defend ancient ruins, kingdoms, or forgotten dungeons.

The model is designed specifically for FDM 3D printing and includes supports for the more detailed and overhanging areas. The chunky construction helps maintain durability while preserving the distinctive details of the armor, stone texture, chains, and fortress elements.

Perfect as a boss monster, dungeon guardian, ancient construct, siege guardian, or powerful NPC in your next tabletop adventure.

Features

• Large, intimidating stone golem design

•  Fortress/castle tower integrated into the model

•  Heavy fantasy armor and oversized gauntlets

•  Chains and detailed stone/metal elements

•  Great for D&D, RPG and tabletop games

•  Designed for FDM printing

•  Supports included for detailed overhangs

•  Chunky and durable structure

•  Great for single-color or multi-color painting

• Perfect as a boss or dungeon guardian

Bring a walking fortress to your tabletop and let your players face a guardian they won't forget!

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   

• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support