hellokitty
cat
kitty
glasseyes
8mm 0.16mm layer, 3 walls, 8% infill
1-disc
PLA
Designer
6mm 0.16mm layer, 3 walls, 8% infill1-disc
PLA
Designer
7
0
This little Kitty just went to the market and got herself a pair of shiny new glass eyes! :)
Hello Kitty by welbot now compatible with 6mm and 8mm glass eyes.
Two variations are provided: a smaller version for 6mm glass eyes and a bigger one for 8mm glass eyes. Files are named accordingly. I printed the 6mm version.
Supports will definitely be required but a brim shouldn't be necessary. I used auto tree supports with and overhang threshold of 25 degrees. I blocked the supports for the eyes. Printed with 8% gyroid infill at 0.16mm layer height.
Happy printing :)
Feeling generous enough to buy me a coffee? Or join my membership to get 3 converted STLs per month. :) - https://buymeacoffee.com/B3ND
Affiliate links for glass eyes.
Aliexpress
https://s.click.aliexpress.com/e/_c3fHmdwH
Amazon
Filament used: white PLA
My printer: Elegoo Centauri Carbon
Affiliate link - https://amzn.to/4qfU9Xj
Originality of the Model
The author declares that this work is their personally remixed model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(4)
Hello_Kitty-8mm glass eyes.stlDesigner
8.64 MB
2026-04-27
- Hello_Kitty-6mm glass eyes.stlDesigner
8.64 MB
2026-04-27
- Hello_Kitty-8mm glass eyes.3mfDesigner
2.44 MB
2026-04-28
- Hello_Kitty-6mm glass eyes.3mfDesigner
2.43 MB
2026-04-28
View all(4)
