hueforge
2dart
Tier
Earth
Space
Kunst
Kuh
Galaxie
- 0.2 mm layer height, 2 walls, 15% infill
1-disc
PLA
Designer
1
0
You can use as much colors as you want and switch at the layer you want, but here are my print settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Start with Black
At layer #4 (0.4mm) swap to Brown
At layer #6 (0.56mm) swap to Grey
At layer #14 (1.2mm) swap to White for the rest
Remember that these instructions change if you make the model bigger or smaller
You can also use the 3MF and you will have my color changes. (for BambuStudio; idk if it works with other slicers)
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(2)
cowinspace.stlDesigner
69.39 MB
2026-04-03
- cowinspace_bambu.3mfDesigner
15.10 MB
2026-04-03
