Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Easter Teddy Bear in an Easter Bunny Costume

Bring a little Easter magic to your 3D printer with this adorable chibi-style teddy bear dressed as a fluffy bunny. This charming character combines the softness of a plush toy with the playful spirit of a springtime mascot. With its oversized bunny ears, rounded proportions, and sweet minimal facial features, the model captures that irresistible kawaii / chibi aesthetic that looks great as a desk decoration, seasonal display, or collectible figurine.

The bear is wearing a cozy bunny hood with tall rabbit ears, giving it the look of a tiny plush friend ready for an Easter egg hunt. Its smooth curves and simplified shapes make the model both cute and highly printable, perfect for hobbyists who enjoy painting or displaying small characters.

Designed with FDM printing in mind, the model includes supports to ensure clean results, particularly under the bunny ears and hood edges where overhangs occur. Once printed, the supports can be easily removed to reveal the smooth rounded surfaces and charming silhouette of the character.

Whether you print it in pastel Easter colors, soft plush-like tones, or shiny silk filament like in the preview, this little bunny bear will quickly become a favorite decoration for spring or a delightful gift for collectors of cute figures.

 Features

• Chibi / kawaii style character
• Plush teddy bear dressed as an Easter bunny
• Large expressive bunny ears and rounded proportions
• Optimized for FDM 3D printing
• Includes supports for reliable printing
• Great for painting, collecting, or seasonal decoration

Print it, paint it, and let this tiny bunny bear bring a touch of cozy charm to your shelf.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support