Penny Wise back lit hue forge - mick | Nexprint: Free 3D Model Downloads

Penny Wise back lit hue forge

mick

Print Profile(1)

0.08mm layer, 2 walls, 100% infill

1-disc

PLA

Designer

Released 2026-02-27

You’ll float, too. 🎈 Just finished this Pennywise back lit HueForge

if you need a light box checkout my Changeable Litho Hueforge light box frame 15x10cm

The Model is 100x150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.51998mm

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

This print uses 4 unique filaments

Swap Instructions:

Start with BambuLab Basic Jade White

At layer #8 (0.72mm) swap to BambuLab Basic Yellow

At layer #11 (0.96mm) swap to BambuLab Basic Red

At layer #16 (1.36mm) swap to BambuLab Basic Black for the rest

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Credit must be given to the creator

Only noncommercial uses of the work are permitted

Remixes must be shared under the same license

No more