NO AMS NEEDED
I only used 3 colors to make it easily compatible with an AMS/MMU but it can easily be printed be manualy performing 5 color swaps

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 137.67x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 1.2mm

    #000000 PLA+ Elegoo Black  Transmission Distance: 0.8
    #f2b67a PLA PolyTerra Pastel Peach  Transmission Distance: 3.5
    #e6e1de PLA Elegoo White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to White
    At layer #6 (0.56mm) swap to Black
    At layer #7 (0.64mm) swap to Pastel Peach
    At layer #10 (0.88mm) swap to White for the rest.

~2:45h
~23g