Project: The Revenge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150.43mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.6mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyLite White Transmission Distance: 5
    PLA PolyLite Grey Transmission Distance: 1
    PLA Smart Recycled Red Transmission Distance: 4.4

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to White
    At layer #19 (1.6mm) swap to Grey
    At layer #22 (1.84mm) swap to Red for the rest.