The figure is a Bullywug from Dungeons & Dragons. It's a 3D-printed, hand-painted miniature depicting a humanoid frog-like creature. It stands in a menacing pose and is wearing leather and metal armor on its torso. It holds a spear in its right hand and its base is designed to look like a cobblestone floor.

Technical Sheet

Figure Name: Bullywug Warrior Scale: 32mm (standard tabletop) Dimensions:

• Height (including base): Approx. 45mm
• Width: Approx. 35mm
• Depth: Approx. 30mm Material: UV Cured Resin (Gray) Finish: Hand-painted with acrylic paints and a matte clear coat for protection. Base: Integrated 25mm cobblestone-texture base. Features: Highly detailed sculpt with individual scales, leather straps, and metal plating. The figure is posed mid-stride, holding a crude spear.

3D Printing Details

Printer Type: SLA/DLP Resin Printer (e.g., Elegoo Mars or similar) Resin: Standard Gray Photopolymer Resin Layer Height: 0.04mm (40 microns) for maximum detail and smooth finish. Supports: Light supports were generated automatically in the slicing software for overhangs, particularly under the chin, arms, and spear tip. Slicing Software: Chitubox v1.9.0 Print Orientation: Tilted backward at a 30-degree angle to minimize layer lines on visible surfaces and reduce cupping. Post-Processing:

1. Washing: The printed model was washed in an Isopropyl Alcohol (IPA) bath to remove uncured resin.
2. Support Removal: Supports were carefully clipped and sanded to smooth any remaining nubs.
3. Curing: The model was placed in a UV curing station for 10 minutes to fully harden. Painting: The figure was primed with a black undercoat, followed by hand-painting using miniature acrylic paints. A protective matte varnish was applied as the final step.