This is a 3D-printed red Among Us figure. The model shows the character in its classic pose, with a smooth, matte finish that highlights the distinct design of the visor and the backpack. The print texture is visible on the surface, giving the piece a unique, tactile quality.

Here are some invented technical details, a datasheet, and print parameters for the 3D-printed Among Us figure.

Technical Details & Datasheet

• Model Name: Among Us Crewmate Standee
• Material: PLA (Polylactic Acid)
• Color: Red
• Dimensions: * Height: 95 mm
  • Width: 60 mm
  • Depth: 55 mm
• Mass: Approximately 45 grams
• Print Time: 4 hours, 30 minutes
• Finish: Textured matte finish (result of FDM printing process)
• Features: Single-piece print, no assembly required. Includes an integrated circular base for stability. The visor is printed as part of the main body and is coated with a high-gloss resin for a reflective appearance.

Recommended 3D Print Parameters

• Printer: FDM (Fused Deposition Modeling)
• Nozzle Diameter: 0.4 mm
• Layer Height: 0.2 mm
• Infill: 15% (Grid or Gyroid pattern recommended)
• Print Speed: 50 mm/s
• Extruder Temperature: 205°C
• Bed Temperature: 60°C
• Supports: Not required
• Brim/Raft: A small brim is recommended to ensure strong bed adhesion for the base.
• Cooling: 100% part cooling fan enabled after the first layer.