Nexprint Logo
Beta
3D ModelsEvents1 Million Creator Fund
$
4
2
1
6
4
Upload

  • hueforge

  • one piece

  • luffy

  • onepiece

  • ruffy

  • anime

  • manga

  • sanji

  • kingofpirates

Hueforge One Piece Sanji
Print Profile(0)

  • Earn points by adding print configurations

4

1

36

3

Released 2025-08-22
Details
Files(1)
Makes & Comments (0)

Project: sanji one piece.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100.65x179mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite White Transmission Distance: 5
    PLA Default White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to beige
    At layer #18 (1.52mm) swap to White for the rest.

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Credit must be given to the creator

Only noncommercial uses of the work are permitted

Models(1)

  • model file image
    sanji one piece_Front_101x179.stlDesigner

    43.33 MB

    2025-09-03

No more